Category Archives: Fusion 360

Homebrew DMX-Controlled RGB LED Light

Posted on April 13, 2019 by Glen

This project is a small DMX-512 controlled, color-changing RGB LED light. The light can be controlled via the DMX512 protocol or it can run a number of built-in programs depending on how the software is configured. The light incorporates an … Continue reading →

Posted in 3D Printing, DMX / Art-Net, Fusion 360, Lighting, PIC24, RGB LED | Comments Off on Homebrew DMX-Controlled RGB LED Light

PIC18 Four-Channel DMX Relay Controller

Posted on October 3, 2017 by Glen

Halloween was right around the corner and I needed a timer with a bunch of relays to trigger some store-bought props and a fog machine periodically. (Mental note: read fog machine specs carefully—not all come with timer remotes.) My first … Continue reading →

Posted in CNC Milling, DMX / Art-Net, Fusion 360, Lighting, Microchip, PIC18 | Comments Off on PIC18 Four-Channel DMX Relay Controller

Creating Custom 3D Printed LED Bar Graphs

Posted on April 29, 2017 by Glen

While building my zombie containment unit, I decided I wanted some LED displays or bar graphs to complement the containment status video running on the smaller secondary video monitor. Some other containment units used LED air pressure gauges from eBay. … Continue reading →

Posted in 3D Printing, Fusion 360, Matlab | Comments Off on Creating Custom 3D Printed LED Bar Graphs

Build a Pair of Robotic Googly Eyes

Posted on April 26, 2015 by Glen

Build your very own pair of giant robot googly eyes! These eyes are built from laser cut acrylic panels and motorized using a pair of NEMA-14 stepper motors. This post is the first in a series of three posts. In … Continue reading →

Posted in Fusion 360, Robotics | Comments Off on Build a Pair of Robotic Googly Eyes